Design and Implementation of Delay-Dependent Wide-Area Damping Control for Stability Enhancement of Power Systems

Abstract

In this paper, the hardware and software design and implementation are proposed for the wide-area damping control (WADC) strategies. First, the hardware-in-the-loop (HIL) real-time (RT) simulation system based on the RT-Lab is established as the closed-loop test platform for the WADC applied in multi-machine interconnected power system. The hardware, which contains the microcontroller, the peripheral analog to digital converter, and the digital to analog converter, are developed based on the AVR 32-bit development board. Three WADC algorithms, i.e., the phase-compensation, the delay-dependent state-feedback, and the dynamic output-feedback method, are introduced. Then, the software design of the above algorithms is proposed and the bilinear transform method is employed to get the discrete-time model of the controllers. The flowchart of each algorithm is designed for the implementation in the environment of hardware. The designed WADC is embedded in a real-time power system. Finally, case studies are carried out based on the HIL real-time simulation system. The proposed control concept and WADC design methods are validated by considering the big/small disturbance and the signal time-varying delay. The effectiveness of the proposed HIL closed-loop test system is also confirmed.