Abstract
Smart materials have been used in various applications. In this paper, a walking robot with six two-degree-of-freedom (2-DOF) legs made of ionic polymer metal composite (IPMC) is designed and implemented. Each leg can work as both a supporter and a driver, closely mimicking a real insect. To support and drive the robot, thicker (around 1 mm in thickness) IPMC strips were fabricated and used, and a 0.2-rad/s square wave is given as an input signal. The IPMC strips exhibit better performance in response to the square wave (8 mm) than sawtooth (4 mm) and sinusoidal (6 mm) waves in deflection. By applying this input signal in sequence, all the IPMC strips bend and walk in the form of six legs. In addition, thin magnet wires were used to supply power to each strip to prevent from confining the motion of our robot. Six lower legs are divided into two groups that work in the opposite directions to move the robot forward by turns. Upper legs are also divided into two groups to lift up their lower legs from making the robot to move back to the same place. The sizes of the IPMC strips and our robot (102 mm × 80 mm × 43 mm) were decided to exhibit better performance (0.5 mm/s) according to our tests.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.