Abstract
Irrigation of fraser fir (Abies fraseri) in Christmas tree production is gaining importance in the upper midwestern United States because of the intensive planting of this species out of its natural range. However, current scheduling practices rely on empirical observations with no monitoring of soil moisture and no use of automated irrigation system. The goal of this project was to design, construct, and implement a tensiometer-based automated irrigation system for fraser fir Christmas tree plantations that would (1) use existing technologies, (2) apply water based on changes in soil moisture content, (3) provide operational flexibility, and (4) interface with a computer for system changes, data collection, and system modifications. Soil tensiometers equipped with 4- to 20-milliampere transducers were installed at two drip-irrigated tree farms. Water on demand was controlled by soil moisture tension levels that triggered the stimulation of a relay wired to solenoids delivering irrigation water to the various treatments. The system functioned according to the design as expected. However, several issues associated with the need for regular maintenance of tensiometers, computer programming, and system wiring created some challenges regarding the reliability and transferability of similar system to commercial facilities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
