Design and Implementation of a 154-kV $\pm$50-Mvar Transmission STATCOM Based on 21-Level Cascaded Multilevel Converter

Abstract

In this research work, the design and implementation of a 154-kV <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\pm$</tex> </formula> 50-Mvar transmission static synchronous compensator (T-STATCOM) have been carried out primarily for the purposes of reactive power compensation and terminal voltage regulation and secondarily for power system stability. The implemented T-STATCOM consists of five 10.5-kV <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$\pm$</tex></formula> 12-Mvar cascaded multilevel converter (CMC) modules operating in parallel. The power stage of each CMC is composed of five series-connected H-bridges (HBs) in each phase, thus resulting in 21-level line-to-line voltages. Due to modularity and flexibility of implemented HBs, each CMC module has reached a power density of 250 <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">$\hbox{kvar/m}^{3}$</tex></formula> , thus making the mobility of the system implementable. DC-link capacitor voltages of HBs are perfectly balanced by means of the modified selective swapping algorithm proposed. The field tests carried out at full load in the 154-kV transformer substation where T-STATCOM is installed have shown that the steady-state and transient responses of the system are quite satisfactory.