Abstract
AbstractThe design and optimisation of a five‐cascade layer Rotman Lens based on waveguide with a graded refractive index at Ka‐band frequency are presented. The proposed lens incorporates 5 layers within the cavity, utilises a modified three focal Rotman lens design methodology to achieve perfect phasing for true time delay beam steering, and optimises each layer's parameters such as refractive index, vertex location, and contour angle to improve insertion loss between input ports and output array elements. This approach enhances energy concentration between input and output ports, reducing spillover to dummy ports. The graded layers are formed using periodic cubic metallic posts with varying heights within a parallel plate waveguide. The results show an average improvement in the insertion loss of 16% and a peak improvement of 48% across the bandwidth when compared to conventional Rotman lenses. The normalised average phase error across the array elements for all beam ports excitation is 4 × 10−3 and the peak degradation of the main beam during beam scanning from 0° to ±22° varies from 0.7 to 1 dB at different frequencies operating in the Ka‐band (24–30 GHz) with potential applications for 5G communications. The simulation results demonstrate good agreement with the measurement results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.