Design and Fabrication of Single-Mode Multi-Junction 905 nm VCSEL With Integrated Anti-Phase Mode Filter

Abstract

In this paper, a record-high single-mode output power from a multi-junction vertical-cavity surface emitting laser (VCSEL) emitting at 905nm is achieved. Single spectral mode emission of the VCSEL is realized by using an anti-phase mode filter, placed at the top surface of the device, that acts as a relief layer to suppress the higher order transverse modes. Placement of such anti-phase layer at the surface areas in which the higher order modes are expected to emit, leads to reduction in the effective mirror reflectivity at those areas, increased optical losses, and consequently, increased threshold gain for the higher order modes compared to the fundamental mode. The room-temperature light-current-voltage characteristics of a 6-junction 905nm VCSEL with an oxide aperture size of ∼8μm and mode filter size of 5μm shows a single-mode optical power of 12.55mW and maximum power conversion efficiency of 56.48%. Moreover, the emission spectrum of this device shows a stable side-mode suppression ration of >30dB in the single-mode operation regime. The VCSEL remains reliably single-mode at higher temperatures, generating a maximum optical output power of 9.48mW at 60°C. Such remarkable single-mode performance can be mainly attributed to the multi-junction epitaxial structure of the device, in which the output optical power is expected to proportionally increase according to the number of bipolar cascade active regions.