Abstract
This work describes the consequence of graphene oxide on the paddle shaped cantilever structure for the measurement of humidity in oil condition monitoring .The oxides present in the graphene has an significant effect in absorbing the content of water that available in the earth. The model for humidity sensor is designed and simulated using comsol Multiphysics. Various structures were simulated and the best structure is chosen for designing the humidity sensor. Graphene oxide was chemically synthesized from graphite powder. Thin film of GO was deposited on Aluminium substrate using spin coating. Various materials were analysed and the best material is coated on the substrate for humidity sensing. The samples were characterized using Scanning electron Microscope and Xray Diffraction methods. The sensitivity is ten times better than the conventional humidity sensor. The response time is fast less than ¼ of the conventional type. The recovery time of the graphene oxide based humidity sensor is also less than ½ of the conventional one.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.