Abstract

 
 
 These brakes designed by controlling for equipment, automobiles and movers are suitable for AC&DC power supplies up to 12 v to 220 v and are suitable for wide range of drum sizes 10 to 380 mm dia these brakes are suitable with a rated torque ranging from 100kg-cm for the smallest brake up to 2000 kg-cm for a 380mm dia at 50% coil rating, the coil remains in circuit for a maximum 5 min out of every 10min. Since these brakes are closed position, the release of brake shoes is affected by energizing the electromagnetic coil which over comes the spring force and shoes are moved clear of drum by lever system so that the drum is free to rotate without any friction. When the power given to the electromagnetic coil the coil gets energized and in turns the plunger pulls down. The plunger in turn operates the arm of the brake and the brake opens. When specied brake drum both pin bush type and flexible geared type can be supplied along with the brakes.
 
 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
