Abstract
This article reports the design, fabrication, and performance of an annular-array ultrasound transducer using (K, Na)NbO3 (KNN)-based lead-free 1-3 piezoelectric composite. The 1-3 piezoelectric composite based on lead-free 0.965(K0.45Na0.55)(Nb0.96Sb0.04)O3-0.035 Bi0.5Na0.5Zr0.85Hf0.15O3 (KNNS-BNZH) was first prepared with the dice-and-fill method. Different from previous reported studies, by patterning annular electrodes on this kind of 1-3 composite, a five-element annular-array transducer in diameter of 6 mm was designed and successfully fabricated and its working center frequency was increased from 5 MHz to around 15 MHz. Meanwhile, a -6 dB bandwidth of 50% was achieved for each annular-array element via a pulse-echo response measurement. Moreover, the obtained annular-array transducer exhibits low crosstalk (<-40 dB) and a high electromechanical coupling coefficient of around 0.7. The application of ultrasonic imaging was further demonstrated to show its excellent performance. Both theoretical analysis and experimental results show that the obtained annular-array transducer presented in this work has a competitive capability for ultrasonic application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
