Design and Fabrication of 5 Ton Hydraulic Press Machine

Abstract

A hydraulic press is a machine using a hydraulic cylinder to generate a compressive force. Frame, hydraulic cylinder and press table are the main components of the hydraulic press. In this project press frame, cylinder and press table are designed by the design procedure. They are analyzed to improve their performance and quality for press working operation. Using the optimum resources possible in designing the hydraulic press components can effect reduction in the cost by optimizing the weight of material utilized for building the structure. An attempt has been made in this direction to reduce the volume of material. So in this paper we consider an industrial application project consisting of mass minimization of H frame type hydraulic press. This press has to compensate the forces acting on the working plates and has to fulfill certain critical constraints. Here we use implementation for analysis and optimization of hydraulic press. The aim of this paper is to integrate the mechanical system of hydraulic press with hydraulic system to facilitate the ease of operation to manufacture the smaller parts in a bulk. In the present scenario, time constrain is a crucial part for completion of any production process. Thus with the aid of automization, the production time can be reduced as well as higher degree of accuracy can be achieved as the human efforts will be alleviated. Thus an attempt has been made to provide the smooth and rapid functioning of press work with the help of hydraulic system.