Abstract
This paper proposes a new chevron type bi-stable MEMS actuator using hinges and coupling bar for the improvement of the stable latch-up operation. The thickness of the hinge is determined as 2.6 /spl mu/m oriented in the diagonal direction based on the analytical results for the buckling actuation with low voltage operation. The proposed equivalent stiffness modeling is in a good agreement with the FEA using ANSYS. Considering the effect of the hinge thickness reduction into the equivalent stiffness modeling, the operation performance is analyzed. The voltage required for the bi-stable actuation is also calculated, which predicts 36.1 V and 37.4 V as the voltages of the forward and backward actuation for the stroke 60 /spl mu/m, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.