Abstract

We describe the design and the experimental characterization of multilinear silicon drift detectors suitable for two-dimensional (2D) position-sensing applications with very fast readout (i.e., operating at high drift fields). The specific design issues taken into account in order to operate at high drift fields (e.g., able to achieve drift speeds of the order of 1 cm/μs) will be discussed. The designed detectors feature the possibility to independently bias the field-plates covering the interstrip oxide in order to investigate the impact of the field-plate voltage on the transport properties and on the surface generated leakage current. In order to test the effectiveness of the proposed designs, a fast (100 ps) infrared pulsed laser, generating the desired signal charge, has been focused to a small spot (10 μm FWHM) on the front side of the detector and displaced along the drift and lateral directions to study the detector response. The experimental characterization, carried out close to room temperature, includes the assessment of the maximum drift field, of the achievable spatial resolution, and of the lateral charge confinement.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.