Abstract
A membrane absorption heat pump uses absorbent and refrigerant (solvent) flows separated by a membrane to create temperature gradients (aka temperature lifts) used for heating or cooling. Compared to vacuum absorption heat pumps, an atmospheric-pressure membrane heat pump provides more compact designs, potentially enabling applications such as energy-efficient cooling for electronics. In addition, storing concentrated absorbent offers unique options for energy storage for solar heating and cooling of buildings. A new membrane heat pump module was built using two sets of rows of hollow fibers with stagnant air between the fibers to reduce conductive heat transfer. Transport coefficients for the complex air-gap geometry were estimated with a three-dimensional finite-volume heat transfer analysis of the air gap region with results fitted to a modified conduction shape factor. A two-dimensional finite-difference model of the entire process shows good agreement with experiments performed over different air-gap widths, flow rates, inlet temperatures, and absorbent concentrations. Temperature lifts up to 9 °C were achieved with 39% (mass) LiCl (aq) feed solution and 35 °C inlet temperatures. Extensions of the modeling to higher-porosity, larger-pore-size membranes suggest that temperature lifts of 14 °C at ambient inlet temperatures are achievable in our module geometry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
