Abstract
Astronomy photonics has opened up a new era for the application of astronomical optical instruments. The fiber coupling system serves as the crucial link between the telescope and photonic devices. This paper explores a beam shaping method that utilizes a coupled lens to enhance the efficiency of coupling light into an optical single mode fiber. Compared to directly coupling the telescope beam into the fiber, this approach offers improved coupling efficiency and greater adjustment tolerance. The laboratory-based optical fiber coupling system described in this study comprises an imaging component with an F/50 ratio and a fiber coupling component. Theoretical analysis indicates that optimal coupling efficiency is achieved when the diameter of the focusing spot, limited by diffraction, matches the fiber core size. Any axial error, position error, or tip-tilt error between the lens and the fiber will reduce the coupling efficiency. Experimental results confirm that the coupling system achieves an efficiency of approximately 70%, which is close to the theoretical limit of 78%. These findings underscore the effectiveness of the fiber coupling method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
