Abstract
ORC (organic Rankine cycles) represent a sound solution for the exploitation of thermal energy available at low temperature.The prototype of a small ORC power plant has been realized at the Energy Systems Laboratory of Cassino University. In this paper, the plant design, the experimental methodology and the thermodynamic analysis of the work cycle have been illustrated. The aim of the work is to assess the feasibility of small-scale ORC plants.The basic idea is to analyze the performance of a small ORC plant able to exploit low-temperature heat sources.Thus, a simple organic Rankine cycle has been analyzed and R245fa as working fluid has been selected. Due to the small working fluid flow rates, a volumetric machine, in particular a scroll expander, has been chosen for mechanical power generation.The hot source temperature has been varied in the range 75–95 °C and the cold sink temperature ranged between 20 °C and 33 °C. The R245fa vapor maximum pressure varied from 6 up to 10 bar. In this operating range, the best obtained results were: electric power equal to 1.2 kW, specific work about 20 kJ/kg and cycle efficiency slightly greater than 9 percent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
