Abstract
Straw returning has shown great advantages in residue management and soil protection in crop planting systems. Mechanized retention of straw is the primary straw returning method, which can reduce costs and improve efficiency. It is important to increase the chopping quality in the field of straw returning, because poor chopping quality will provoke a series of problems including seeding blockage. Straw chopping pass rate (CPR) is an important indicator to measure the chopping quality. Therefore, the CPR of straw should be improved during the chopping process. This paper introduced a novel maize straw chopping device. With the ground as the support, the maize straw was chopped rapidly in the vertical direction. The key parameters of the chopping device were determined by establishing mathematical models and kinematics simulation analysis methods via ADAMS. The effects of rotational velocity, installation positions of chopping units, and the tractor forward velocity on the CPR of maize straw and soil bulk density (SBD) were examined through the Box–Behnken design method. The test factors were the rotational velocities of the chopping units (RV, 550 rpm, 650 rpm, 750 rpm), the installation distance of the two chopping units (IDTCU, 480 mm, 600 mm, 720 mm), and the velocity of the tractor (VT, 3 km/h, 4 km/h, 5 km/h). The results showed that the maximum CPR value and better value of SBD were obtained under the RV of 610 rpm, the IDTCU of 526.8 mm, and the VT of 3.96 km/h. Finally, field validation experiments were conducted under the RV of 610 rpm, the IDTCU of 550 mm, and the VT of 4 km/h. The results showed that the CPR of maize straw was 92.0%, which was superior to the requirement as stipulated in the National Standards of China (CPR ≥ 85%). In addition, in 0–50 mm and 50–100 mm soil layers, the bulk density was decreased by 25.42% and 13.24%, respectively. These results become of considerable importance for crop production in China.
Highlights
There are many nutritional elements (N, P, K) in the straw that are beneficial for the soil
We proposed a novel chopping method, based on the chopping principle of reciprocating intermittent motion, and designed the chopping device to enhance the chopping pass rate (CPR) of maize straw and improve seeding conditions
Some maize straw remains upright in the field (Figure 12a)
Summary
There are many nutritional elements (N, P, K) in the straw that are beneficial for the soil. In terms of optimizing the blade, a V-L-type chopping blade was designed by Jia et al [12], and the straw CPR was increased to 93.43% when the rotational velocity of the V-L-type chopping blade was 1400 rpm. Liu et al [16] designed a disc blade to promote the maize straw chopping quality. We proposed a novel chopping method, based on the chopping principle of reciprocating intermittent motion, and designed the chopping device to enhance the CPR of maize straw and improve seeding conditions. The value of F is related to the materials, edge angle, velocity, and acceleration of the chopping blade [30]. The rotational velocity of the eccentric disc and the velocity of the tractor determined the length of the straw chopped by the device. Where v is the velocity of the tractor (km/h), t is the operation time (s), and l is the length of the straw chopped by the front chopping unit (mm)
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
