Abstract
Normal 0 21 false false false TR X-NONE X-NONE The purpose of this study is to design a 240 MW el thermal power plant (TPP) to be operated with ten different types of Turkish lignite and fulfill an exergy analysis including the determination and comparison of the performance for each type of lignite. Additionally an examination of the effect of the ambient temperature on the power plant’s exergy efficiency and calculation of the CO 2 emissions of each lignite type is carried out. Exergy destruction of each component is investigated by using conservation of mass, conservation of energy and exergy destruction in an open system at steady state. Sivas Kangal lignite is selected for designing. N et energy and exergy efficiencies of the plant are calculated as 37.16 and 34.84 % respectively. The analysis of the case study revealed that the boiler is the major source of exergy destruction with 299.10 MW and 83.29 % of the total exergy destruction of the overall plant . Another point is that, fuel consumption and CO 2 emissions of the TPP increase with rising ambient temperature. It should be noted that, comparison between the performances and emission data of the power plants can provide useful data for the future coal-fired thermal power plants investments in Turkey.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.