Design and development of ceramic-based composites with tailored properties for cutting tool inserts

Abstract

A successful approach to the development of tailored cutting tool materials requires the development of innovative concepts at each step of manufacturing, from the material design, synthesis of composite powders, to their processing and sintering. In this paper, a computational design approach is applied in the development of reinforced ceramic-based cutting tool inserts with tailored structural and thermal properties. Several potential filler materials are considered at the material design stage for the improvement of structural and thermal properties of a selected matrix material. Properties, such as an improved thermal conductivity and reduced coefficient of thermal expansion are essential for an effective cutting tool insert to absorb thermal shock at varying temperatures. In addition, structural properties such as elastic modulus have to be maintained within a moderate range. A mean-field homogenization theory and effective medium approximation using an in-house code are applied for predicting potential optimum structural and thermal properties for the required application. This is done by considering the effect of inclusions as a function of volume fraction and particle size in the ceramic base matrix. Single inclusion composites such as alumina-silicon (Al2O3-SiC) and alumina-cubic boron nitride (Al2O3-cBN) as well as hybrid composite such as alumina-silicon-cubic boron nitride (Al2O3-SiC-cBN) are developed using the Spark Plasma Sintering (SPS) process in line with the designed range of filler size and volume fraction to validate the computational results. It is found that the computational material design approach is precise enough in predicting the target properties of a designed hybrid composite material for cutting tool inserts.