Abstract
The design of an Orifice Pulse Tube (OPT) Cryocooler has been validated and applied for the design of Inertance Pulse Tube (IPT) Cryocooler with 15 W at 70 K. Parametric analysis based on cyclic simulation model has been used as a design tool. This model begins with the estimates of the ideal refrigerating effect and ideal power requirement. Different losses in refrigerating effect and power are later incorporated to arrive at the net refrigeration effect and gross power requirements. Based on this information, the IPT cryocooler has been developed. A matching moving coil type opposed piston linear compressor has been designed and developed to meet the requirements of this IPT cryocooler. The system comprising IPT cryocooler and linear compressor has been installed and commissioned. To validate the design, detailed experimental investigations on the IPT are planned. Some of the experimental results are reported in this paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.