Abstract

India has large proven reserve of coal but most of the coal has large quantity of ash. Utilization of this high ash content coal is again a verychallenging task. Presently, gasification of high ash coals has not yet been in application due to the difficulties arising from the ash handlingprocesses. In this work an attempt was made to design a partially fluidized bed reactor that can handle 30 kg/hr coal as a feedstock. By usingan appropriate design procedure a complete design of a hybrid gasifier was studied deeply. The major aim of present research is todetermine the air flow rate for proper gasification, reactor diameter and reactor height, feed particle diameter, nozzle orientation and numbernozzles, reduction zone diameter and height. Experiments were carried out with feeding rate of 9.8 kg/hr with high ash content coal having39.83% ash. Satisfactory results have been found during experiments. The average producer gas generation during trial run was found to be29.8 Nm3/hr while average calorific value of producer gas was about 4500 kJ/Nm3. The work described here favours us understand the realgasification process for high ash content coal and thus facilitates the industrial application of gasification technology.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.