Abstract
In the present scenario, smart devices are using flexible wearable wireless technologies to enable interaction among people and their surrounding equipments. Due to the commercialization of these flexible electronic devices and systems, these systems require the integration of flexible antennas. The compactness and flexibility of the antenna are the major objectives of the current research. This paper highlights the comparative study of a small-sized swastika-shaped slotted patch ultra-wide-band (UWB) antenna. The designed microstrip patch antenna is simulated using Rogers RT 5880 as a substrate mounted on the partial ground structure. A rectangular substrate with a size of 24.56 × 22.48 mm × 1.575 mm is placed between the partial ground and patch. The dimensions of the radiating patch are 13 mm × 10.5 mm × 0.035 mm. The resonant frequencies of the designed antenna are 4.43 GHz and 8.84 GHz and have a large fractional bandwidth of 110% in the range of 3.1 to 10.7 GHz. The maximum observed gain and directivity of the proposed antenna are 5.9 dB and 6.8 dBi at 4.43 GHz. The simulation of the presented antenna design is performed in CST Microwave Studio 2018. The proposed antenna performance metrics are comparatively analyzed using different substrate materials like Rogers RT 5880, Jeans, and rubber substrates. The developed dual-band antenna can be useful for WBAN communication applications in the UWB band.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.