Abstract
SummaryIn this paper, a slotted printed rectangular monopole antenna (SPRMA) is proposed that covers the entire UWB (ultra‐wideband) except for WiMAX and WLAN (802.11/a‐n). In the first stage, a rectangular monopole antenna is designed, which covers the entire UWB frequency. Then, a T‐slot is inserted in the radiating patch to have the rejection of the band containing WiMAX and WLAN (802.11/a‐n). The notch characteristics of the proposed antenna are observed from 3.0 to 3.65 GHz and 4.5 to 6.65 GHz respectively. Measured peak gain of 3.28 dBi has been observed at 4.25 GHz frequency. To show the validation of antenna, mathematical analysis using circuit theory has been also given in the paper. The prototype has been also tested inside the anechoic chamber to give the validation in real‐time environment. Several other reported antenna structures have also the same notch band in UWB with different notching methods. The proposed structure's radiation properties are compared with other reported structures proving the compactness of the proposed structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
