Abstract
Purpose This paper aims to propose a type of T-shaped two-axis force sensor for measuring the forces in x- and z-axes. The developed sensor has a simple structure and can be effectively assembled into compact devices. Design/methodology/approach A T-shaped plate, with both ends fixed on a base, is used as the substrate of the sensor. Eight strain gauges are placed in the root of the plate or near the sensor head, which can construct two full Wheatstone bridges on the upper and lower surfaces of the plate. When the x- or z-axes forces are applied to the sensor head, different deformation can be generated to the strain gauges. Therefore, the two Wheatstone bridges can be constructed with a different configuration for measuring the forces in x- or z-axes, respectively. Findings A prototype was designed and constructed and experiments were carried out to test the basic performance of the sensor. It has been verified that the developed sensor could measure the x- and z-axes forces independently with a high resolution of 2.5 and 5 mN, respectively. Originality/value Only one thin plate was used in the design, the forces in x- and z-axes could be measured independently and simultaneously, which made the sensor with a simple structure and compact size. Experiments were also verified that there was no crosstalk error occurred in one axis when the force was applied to the other axis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have