Abstract
In this paper, we propose a miniaturized implantable antenna exhibiting a broadside radiation pattern and wide operating bandwidth. Previously reported small implantable antennas often display omni-directional radiation patterns which are not suitable for in-to-off wireless body area network. The proposed design overcomes this problem by optimizing the antenna structure inside a realistic brain implant environment, a seven-layer brain phantom including skin, fat, bone, dura, cerebrospinal fluid (CSF), gray and white matters. The seven-layer phantom was modeled in a full-wave simulation software, and then the antenna was embedded in dura layer. The antenna has a circular shape with a diameter of 10 mm and a thickness of 0.5 mm. The top and bottom insulating layers share the same dimensions of the antenna. With the given location and surrounding materials, the antenna geometry was optimized to resonate at 2.4 GHz and to radiate broadside. The optimal design was fabricated using a low-loss biocompatible PCB material, Taconic RF-35 ( $\varepsilon _{\mathrm {r}} =3.5$ , tan $\delta =0.0018$ ), and tested in a seven-layer brain phantom implemented with semi-solid artificial tissue emulating (ATE) materials. The results of both the simulation and measurement revealed similar −10-dB impedance bandwidths of 13.8% and 14.9%, respectively, which are wider than those of most single-band implantable antennas operating at 2.4 GHz. The proposed antenna also displayed a measured peak realized gain of −20.75 dBi and an acceptable radiation efficiency of 0.24%, which are within the typical range. Furthermore, we calculated the specific absorption rate (SAR) and assessed its compliance with the IEEE safety guidelines.
Highlights
Brain implant devices are designed to help both patients living with brain diseases and people with perspective neurological disorders during therapy and early diagnosis, respectively
Chung: Design and Characterization of a Miniaturized Implantable Antenna in a Seven-Layer Brain Phantom patterns, which are not favored in this brain signal transmitting application as the RF signals at the back lobe are not used for this communication and may increase specific absorption rate (SAR) in surrounding brain tissues
Bandwidths of the proposed antenna were 330 MHz (13.8%) in the simulation case and 370 MHz (14.9%) in the measurement case, both of which are larger than those of many single-band implantable antennas operating at 2.4 GHz (e.g., [25]–[27]) reported in the literature
Summary
Brain implant devices are designed to help both patients living with brain diseases and people with perspective neurological disorders during therapy and early diagnosis, respectively. INDEX TERMS Artificial tissue emulating (ATE) materials, broadside radiation pattern, implantable antenna, in-vitro testing, seven-layer brain phantom, specific absorption rate (SAR).
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
