Design and characterization of a meandered V-shaped antenna using characteristics mode analysis and its MIMO configuration for future mmWave devices

Abstract

This study presents a novel four-element MIMO antenna system designed for the millimeter-wave (mmWave) spectrum. Each MIMO antenna element features a meandered V-shaped radiating structure fed by a 50Ω microstrip line and a partial ground plane with a square notch printed on a 0.254-mm thick RO5880 substrate. The characteristic mode analysis (CMA) of the antenna is done, which reveals that the antenna efficiently utilizes Mode 2, while Modes 1 and 4 also contribute to the resonance, resulting in a wideband response within the mmWave spectrum. A four-element pattern diversity MIMO configuration is developed to evaluate its suitability for MIMO communication, incorporating a connected ground-structure decoupling network to enhance isolation. The MIMO system achieves over 20 dB isolation between elements, with an impedance bandwidth ranging from 20.2 to 33.05 GHz and a peak gain of 6.6 dBi at 28 GHz. Fabrication and measurement validate the design, showing strong agreement with simulations. The MIMO performance metrics, including envelope correlation coefficient (ECC), diversity gain (DG), mean effective gain (MEG), total active reflection coefficient (TARC), and channel capacity loss (CCL), are within acceptable limits, suggesting that the proposed MIMO antenna system is a promising candidate for future mmWave applications.