Abstract
The design and characterization of a simple, flexible wideband antenna using polydimethylsiloxane (PDMS) composite are presented. Conductive fibers are used to construct the metallic parts on a PDMS composite. To characterize the performance, two identical antennas are designed, one using the PDMS composite while the other on conventional dielectric materials. It was observed that both antennas behave well in terms of the matched bandwidth; however, the radiation towards the broadside direction is reduced when using the PDMS composite as substrate, particularly at higher frequencies. The antenna exhibits a matched bandwidth of 59.9%, ranging from 3.43 to 11.1 GHz. Moreover, the bending analysis carried out for different scenarios show that the wideband behavior of the antenna is well preserved and the variation reaches a maximum of 1% variation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.