Design and application of a power frequency electric field measuring device for a high‐humidity environment

Abstract

AbstractThe power frequency electric field is the most important electromagnetic environmental factor in alternating current power transmission projects. The humidity has a negative influence on available electric field measuring devices, which may lead to discrepancies of up to seven times the actual value at a relative humidity exceeding 80%. The changes in the support and probe shell impedance may be the reason for the error. The optimization measures include modifying the communication mode, designing a suitable structure and circuit for the probe, and using composite insulating material with strong hydrophobicity for the support. A three‐axis omnidirectional electric field measuring device was developed based on wireless communication and composite support. The variation of the measured electric field strength value is less than 1% at relative humidities ranging from 45% to 90% in the laboratory, and the measured results obtained in high humidity at the high‐voltage test site and under the transmission line demonstrated high accuracy. The research demonstrates that the composite support can be used to improve the performance of conventional devices. The proposed device can better meet the needs for accurate measurement of electric field strength in a high‐humidity environment and overcome the technical problems raised by the IEC standard.