Design and application of a novel coal-fired drum boiler using saline water in heavy oil recovery

Abstract

In this paper, the design and operation of a novel coal-fired circulating fluidized bed (CFB) drum boiler that can generate superheated steam using saline water were introduced. The natural circulation water dynamics with a drum was adopted instead of the traditional once-through steam generator (OTSG) design, so that superheated steam can be generated for the better performance of the steam assisted gravity drainage (SAGD) technology in heavy oil recovery. The optimized staged evaporation method was proposed to further decrease the salinity of water in the clean water section of the boiler. The evaporating pipes of the salted water section were rearranged in the back pass of the boiler, where the heat load is low, to further improve the heat transfer safety. A CFB combustion technology was used for coal firing to achieve a uniform heat transfer condition with low heat flux. Pollutant control technologies were adopted to reduce pollutant emissions. Based on the field test, the recommended water standard for the coal-fired CFB drum boilers was determined. With the present technology, the treated recovery wastewater can be reused in steam-injection boilers to generate superheated steam. The engineering applications show that the boiler efficiency is higher than 90%, the blowdown rate is limited within 5.5%, and the superheat of steam can reach up to 30 K. Besides, the heavy oil recovery efficiency is significantly improved. Moreover, the pollutant emissions of SO2, NOx and dust are controlled within the ranges of 20–90 mg/(N·m3), 30–90 mg/(N·m3)and 2–10 mg/(N·m3) respectively.