Abstract
Power head is the main motive mechanism of rotary drilling rig. High axial pressure and high frequency is one of its typical working conditions. Axial loading test is a key point in power head performance tests. Overall design, system theoretical analysis and simulation of power head axial loading system were carried out. The bond graph model and state equations of power head axial servo loading system were built on the basis of bond graph theory. Hydraulic system simulation model was constructed and axial steady-state and dynamic loading simulation was made by use of hydraulic simulation software. The maximum axial steady-state load is up to 450kN and the dynamic frequency is 20Hz, both of which can meet the technical requirements. The simulation validates the feasibility of the scheme about power head axial loading system and it provides theory and practice guidance for perfecting the loading system. DOI: http://dx.doi.org/10.11591/telkomnika.v11i10.3390
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: TELKOMNIKA Indonesian Journal of Electrical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.