Abstract
Lightweight autonomous underwater vehicles (AUVs), powered by rechargeable batteries, are widely deployed in inshore surveying, environmental monitoring, and mine countermeasures. While providing valuable information in locations humans have difficulty accessing, limited battery capacity of such systems prevents extended mission times. In order to extend mission times, this paper proposes a three-phase wireless charging system that could be used in a field-deployable charging station capable of rapid, efficient, and convenient AUV recharging. Wireless charging should not, however, affect instrumentation located inside the AUV. Thus, a three-dimensional finite element analysis tool is employed to study the characteristics of magnetic fields inside the AUV during three-phase charging. Simulation results reveal that the magnetic field generated by the proposed three-phase coil structure is concentrated away from the center of the AUV, where instrumentation would nominally be located. Detailed circuit analysis and compensation method to achieve resonance on both transmitter's and receiver's sides are also given. To validate the proposed concept, a three-phase wireless charging system is developed. Experimental results demonstrate that the system is able to transfer 1.0 kW with a dc–dc efficiency of 92.41% at 465 kHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.