Abstract
This paper proposes a novel segmented cladding fiber structure for large mode area properties. In this structure a thin ring is placed between the high index core and nonuniform cladding. It is called Single-Ring Segmented-Cladding Fiber (SR-SCF). The novel fiber offers the possibility of single-mode(SM) operation from 1µm to 1.7µm with a large core diameter. With illustrations, the fiber has a better SM operation than segmented-cladding fiber (SCF) is demonstrated. A large effective area of 1000µm2 is achieved. The SM operation with very high suppression of the higher order modes can arise by 76%. Moreover, mode spacing between the adjacent modes (LP01 and LP11) is also improved significantly. Besides, the bending property is analyzed. It is found that the fiber is insensitive to bending angle ranging from −180° to 180° at bending radius of 30cm. The proposed fiber will play an important role in developing high power fiber laser, fiber amplifier and high power delivery application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.