Design and Analysis Models with PID and PID Fuzzy Controllers for Six-Phase Drive

Abstract

Due to their reliability, design and analysis models with PID and PID fuzzy controllers for six-phase drive are being applied in new areas in various industries, including transportation. First, the development of any system with multiphase motors requires an elaborate model to define the control mode and controllers. The modeling of a control system for six-phase drive is based on its conventional d-q mathematical model and indirect field-oriented control. In this study, a Simulink six-phase drive model is designed with indirect field-oriented control and simulated with two types of fuzzy controller, PID and PID fuzzy. The simulation results are presented and analyzed; these results reflect the step response and performance at the provided speed reference law while keeping the load application at a constant speed. A fuzzy controller with 49 rules is considered and applied. With field-oriented control and a well-tuned PID controller, the six-phase electric drive has good step response specifications: a short settling time when starting without a load, no overshoot in the step response, small size, and a slight decrease in speed when loaded. The system employing a PID fuzzy controller shows slightly better results in response to the application of torque: the decrease in speed is eliminated more quickly. The simulation results were tabulated with the PID and with the results of previous research that rearranged some models to only operate in the classical controller mode. The simulation results indicate the robustness to disturbance of both the systems with six-phase drive and provide high-quality transient specifications at the provided reference speed.