Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding.

Abstract

In this paper, an asymmetric large-mode-area photonic crystal fiber (LMA-PCF) with low bending loss at a smaller bending radius is designed. The finite-element method with a perfectly matched layer boundary is used to analyze the performance of the PCF. To achieve LMA-PCF with low bending loss, the air holes with double lattice constants and different sizes at the core are designed. Numerical results show that this structure can achieve low bending loss and LMA with a smaller bending radius at the wavelength of 1.55μm. The effective mode area of the fundamental mode is larger than 1000 μm2 when the bending radius is ≥10 cm. The bending loss of the fundamental mode is just 0.0113dB/m, and the difference between the fundamental and high-order modes of the bending loss is larger than 103 when the bending radius is 10cm. Simulation results show this novel PCF can achieve LMA and have effective single-mode operation when the bending orientation angle ranges in ±110°. This novel photonic crystal has potential application in high-power fiber lasers.