Design And Analysis Development Of RL Component On Power Use In 3 Phase Motor Loads With Virtual Instrument

Abstract

The development of science and technology must be accompanied by the development of human resources. With reliable human resources and understanding the technology, it will certainly be easier for them to apply their knowledge to the rapid development of the technological world. Understanding of a component is very necessary can analyze the use of each component in an electric power system. Among these components are Resistors and Inductors, the electrical power system components need to know their characteristics so that they can be applied properly to the equipment. The purpose of this study is to obtain the characteristics of the R load and L load on the performance of the 3 phase motor and its effect on the power consumption of the 3 phase motor, so that the power consumption and maintenance costs of the 3 phase motor can be minimized. The research methodology is by installing resistor and inductor circuits in the R, S and T phases that lead to 3 phase motor as the main motor coupled with a 3 phase delta motor which is given DC voltage as a load, while for current and voltage measurement using current transformers and voltage transformers are then analyzed with Data Acquisition System (DAS). On the current vs power of the 0.014 Henry inductor, the load is 0 to 80 VDC averaging 782 mA of current. At a load of 0 to 80 VDC shows a power of 299 watts.