Dermal and oral exposure risks to heavy metals from 3D printing metal-fill thermoplastics

Abstract

Manufacturing advancements in polymer printing now allow for the addition of metal additives to thermoplastic feedstock up to 80–90 % by weight and subsequent printing on low-cost desktop 3D printers. Particles associated with metal additives are not chemically bound to the plastic polymer, meaning these particles can potentially migrate and become bioavailable. This study investigated the degree to which two human exposure pathways, oral (ingestion) and dermal (skin contact), are important exposure pathways for metals (copper, chromium, and tin) from metal-fill thermoplastics used in consumer fused filament fabrication (FFF). We found that dermal exposure to copper and bronze filaments presents the highest exposure risk due to chloride (Cl−) in synthetic sweat driving copper (Cu2+) release and dissolution. Chromium and tin were released as micron-sized particles < 24 μm in diameter with low bioaccessibility during simulated oral and dermal exposure scenarios, with potential to undergo dissolution in the gastrointestinal tract based on testing using synthetic stomach fluids. The rate of metal particle release increased by one to two orders of magnitude when thermoplastics were degraded under 1 year of simulated UV weathering. This calls into question the long-term suitability of biodegradable polymers such as PLA for use in metal-fill thermoplastics if they are designed not to be sintered. The greatest exposure risk appears to be from the raw filaments rather than the printed forms, with the former having higher metal release rates in water and synthetic body fluids for all but one filament type. For brittle feedstock that requires greater handling, as metal-fill thermoplastics can be, practices common in metal powder 3D printing such as wearing gloves and washing hands may adequately reduce metal exposure risks.