Depth Variability of Compressive Strength Test Results of Toki Granite from Shobasama and Mizunami Construction Sites, Japan

Abstract

This paper studies the depth variability of uniaxial compressive laboratory test results on intact Toki granite (i.e., sound rock without macroscopic fractures) from the Shobasama and Mizunami Construction Sites, Japan. Some of the depth variability observed in the laboratory results can be indirectly attributed to the high fracture frequency of the “upper highly fractured rock domain” from which some of the samples were taken. For samples taken from the “lower sparsely fractured rock domain,” however, the uniaxial compressive strength of the granite seems to be very strongly correlated to the level of in situ rock stress (i.e., maximum shear stress) determined by measurement results obtained from hydrofracturing tests. The correlation between the laboratory results and the level of in situ stress is explained by the damage due to the complex stress path that the cores undergo during drilling, besides the stress concentrations at the drill-bit/rock contact, which can also affect the microcracking of the samples. An attempt to adjust laboratory test results to estimate the in situ intact rock strength of Toki granite based on its correlation with in situ stresses was carried out.