Abstract
The deposition experiments were carried out under high pressure (7 MPa) at 285/sup 0/C using model compounds (..cap alpha..-hematite) to investigate the deposition process of crud on boiling surfaces. The effects of several factors, such as the diameter of the model particles (0.15 to 2.3 ..mu..m), pH (7 to 13), and heat flux of the heated surfaces (5 to 16 W/cm/sup 2/), on the deposition rate during the initial stage were investigated. It was found that the deposition rate of the hematite particle, having a narrow particle size distribution, strongly depends on the particle diameter and pH of the crud suspension. An explanation of these results was based on the assumption that the electrokinetic interaction between the particle and the surface plays an important role in the deposition process of the crud particles. Furthermore, it was found that the deposition rate of the hematite, having a narrow particle size distribution, deviates from the linear proportionality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.