Abstract
In this paper, multilayer coatings consisted of amorphous AlCrYN layers and TiBN layers were deposited by the cosputtering technique. The influence of the modulation period of the multilayer coatings on the structure, mechanical properties, and oxidation behavior of the coatings was studied carefully by using scanning electron microscope, X-ray diffraction, nanoindentation, scratch tester, and thermogravimetric analyzer. The results show that the TiBN/AlCrYN multilayer coatings exhibit an amorphous structure without any feature. Decreasing the modulation period could significantly improve the coating hardness and elastic modulus. In addition, the adhesion of the multilayer coatings could be enhanced as the modulation period decreases. At relative low oxidation temperature (≤900°C), a dense aluminum oxide layer formed on the coating surface can effectively hinder the inward diffusion of O and the outward diffusion of metal elements. The oxidation behaviors of the TiBN/AlCrYN multilayer coatings obeyed the diffusion control law. The oxidation resistance of the coatings was increasing with decreasing the modulation period since the interfaces of multilayer structures would block the diffusion of elements. At relative high oxidation temperature (1000°C), however, the coating surface was rapidly oxidized into the porous TiO2 whiskers rather than the dense Al2O3 layer, resulting in the inward diffusion of O and thus causing the serious oxidation of the coatings.
Highlights
Hard nitride coatings deposited by physical vapor deposition (PVD) are widely used as protective coatings in many applications, such as the protection of cutting tools and molds due to their high hardness and wear resistance [1,2,3]
Amorphous TiBN/AlCrYN multilayer coatings with different modulation periods were deposited by the cosputtering technique through varying the rotation speed of table
It is found that the amorphous TiBN/AlCrYN multilayer coatings exhibit the glass-like morphology without any feature
Summary
Hard nitride coatings deposited by physical vapor deposition (PVD) are widely used as protective coatings in many applications, such as the protection of cutting tools and molds due to their high hardness and wear resistance [1,2,3]. The hard coatings prepared by PVD process usually have high residual stress, causing the poor adhesion to the substrate. On the other hand, multilayered architectural structures have been demonstrated to significantly enhance the mechanical properties and oxidation resistance of the PVD coatings [6, 7]. The interfaces among heterolayers can effectively restrain the crack growth and block the diffusion of oxygen and other media corrosion across the PVD coatings and improve the oxidation resistance, corrosion resistance, and mechanical properties of PVD coatings [7]. It is supposed that combining the multilayered architectural structure with the amorphous phase structure can significantly improve the oxidation resistance of the hard PVD coatings. The relationships between the deposition process, microstructure, and properties of the coatings were discussed carefully
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
