Abstract
In this study, WC (tungsten carbide) thin films were deposited on high-speed steel (AISI M2) and Si (100) substrates by direct current magnetron sputtering of a tungsten carbide target having 7% cobalt as binding material. The properties of the coatings have been modified by the change in the bias voltages from grounded to 200 V. All the coatings were deposited at 250°C constant temperature. The microstructure and the thickness of the films were determined from cross-sectional field-emission gun scanning electron microscope micrographs. The chemical composition of the film was determined by electron probe micro analyzer. The x-ray diffractometer has been used for the phase analyses. Nanoindentation and wear tests were used to determine the mechanical and tribological properties of the films, respectively. It is found that the increase in the bias voltages increased drastically the hardness and elastic modulus, decreased the friction coefficient values and increased the wear resistance of tungsten carbide thin films by a phase transformation from metallic W (tungsten) to a nonstoichiometric WC1−x (tungsten carbide) phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.