Abstract
Mechanical properties are very important in structural uses of wood. In the case of larch wood, shear strength (SS) may be a limiting property, because the wood is brittle and it splinters easily. In this study, SS of Siberian larch (Larix sibirica) wood was studied in relation to its axial and radial location and to some other wood properties in the part of the trunk that produces logs of good carpentry quality. SS increased by 21–23% from the pith to the outer heartwood at each studied height (butt, 4.5 and 9 m), and it was at its most approximately 7% higher at the butt than at the other studied heights. The main reason for the radial increase in SS was the increase in density caused by wood maturation, but other factors also affected SS, depending on the grouping mode (combined material, radial/axial location). An exception was sapwood, for which no factors affecting SS could be identified. Thus, sapwood may behave differently from heartwood regarding use, even unexpectedly. The results suggest that mature heartwood, but not juvenile wood and sapwood, of Larix sibirica should primarily be used in products that require high SS.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
