Abstract
PurposeThe purpose of this paper is to investigate the effect of the soft annealing time on the microstructure and hydrogen embrittlement (HE) of Fe-0.22C-11.54Mn-2.05Al steels.Design/methodology/approachSteels A and B with different morphologies were prepared by cold rolling after warm rolling, long/short softening annealing and finally annealing at 700 °C for 30 min. Uncharged and charged samples were subjected to tensile, and HE behavior was studied by electron backscattered diffraction, scanning electron microscopy and X-ray diffraction.FindingsThe two samples exhibited similar tensile strengths. The homogeneous equiaxed microstructure of steel B was found to be more conducive to relieve its HE sensitivity. Steel A exhibited bimodal-grained microstructures – blocky and lath. The formation of crack in the blocky grains of steel A resulted in a significant reduction in its plasticity and tensile strength.Originality/valueThe high HE susceptibility of steel A is mainly connected with the inhomogeneity of martensite transformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.