Abstract
Monoethylene glycol (MEG) is a gas hydrate inhibitor widely applied for natural gas flow assurance. A series of density and electrical conductivity measurements of water + MEG + NaCl mixtures are reported, allowing the supervision of the MEG regeneration unit. Density (509 data points) and electrical conductivity (212 data points) measurements were performed in wide ranges of temperature, T = 278.15−363.15 K, and concentration of solvents and NaCl up to almost saturation. The theory of solutions was applied for density description using excess volume, which was correlated with the Redlich−Kister equation. The resulting absolute and relative mean deviations are 0.00127 g·cm−3 and 0.12%, indicating accurate representation. A semi- empirical correlation with 15 adjustable parameters was considered for electrical conductivity of water + MEG + NaCl mixtures. The obtained absolute and relative mean deviations are 1.49 mS·cm−1 and 5.70%. The properties functions presented an approximately orthogonal behavior to each other, allowing the determination of mixture composition from experimental density and electrical conductivity data. The Matlab environment was found to be robust in solving the nonlinear system of two equations with constraints. The proposed methodology was extensively tested, and deviations less than 0.0060 and 0.0011 in solvents and NaCl mass fractions were obtained, respectively, demonstrating the required accuracy for industrial application
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have