Denitrification effect and strengthening mechanism of SAD/A system at low temperature by gel-immobilization technology

Abstract

Sulfur autotrophic denitrification coupled anaerobic ammonia oxidation (SAD/A) has several advantages over other denitrification processes; for example, it does not consume the organic carbon source, has low operation costs, and produces less excess sludge; however, it has certain disadvantages as well, such as a long start-up time, easy loss of bacteria, and low microbial activity at low temperature. The use of microbial immobilization technology to embed functional bacteria provides a feasible method of resolving the above problems. In this study polyvinyl alcohol‑sodium alginate was used to prepare a composite carrier for fixing anaerobic ammonia oxidizing bacteria (AAOB) and sulfur oxidizing bacteria (SOB), and the structure and morphology of the encapsulated bodies were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Subsequently, the nitrogen removal performance of the immobilized microbial carriers in the gradient cooling process (30 °C to 10 °C) was determined, and the corresponding mechanism was discussed. The results showed that the nitrate-removal efficiencies observed with granular sludge and gel embedding were at 10 °C 21.44 % and 14.31 % lower, than those at 30 °C, respectively, whereas the ammonia-removal efficiency decreased by up to approximately three-fold. The main mechanism was the ‘insulation’ provided by the external gel composed of PVA and SA for the internal sludge and subsequent improvement of its low temperature resistance, while protecting AAOB and SOB from oxygen inhibition, which is conducive to enriching denitrifying bacteria. In addition, the gel does not change the internal sludge species, it can shift the dominance of specific microorganisms and improve the removal efficiency of nitrogen. In summary, the immobilization of AAOB and SOB by the gel can achieve effectively mitigate nitrogen pollution in low temperature environments, thus indicating that the SAD/A process has broad engineering application prospects.