Dendrometric and dasometric analysis of the bushy biomass in Mediterranean forests

Abstract

Abstract The aim of this study was to define the dendrometric and dasometric parameters of five Mediterranean bushy plant species, to make their environmental assessment and to determine correlations with LIDAR data. The species studied were: Quercus coccifera, Rosmarinus officinalis, Ulex parviflorus, Cistus albidus, and Erica multiflora. We calculated the global form factor for each species so as to be able to determine the volume of the plants by measuring their base diameter and length. The model volume closest to the real volume was the cylinder, which had form factor values of between 0.8 and 2.33. We also studied the evolution of the moisture content of the vegetation after cutting. The initial values were from 20 to 30%, with a dry density of 1 t/m3. We defined an occupation factor to determine the relationship between the real volume occupied by the plants in an area and a model volume (hemisphere, paraboloid, cone, and cylinder). The occupation factor was similar for the five species studied in dm3 of material per m3 of (model) apparent volume: 3.5 dm3/m3 for the cylinder; 12.5 dm3/m3 for the cone; 8.5 dm3/m3 for the paraboloid; and 14.5 dm3/m3 for the hemisphere. These factors enabled us to calculate the biomass contained in an apparent volume of bushes (including materials and hollows) by density. The prediction models tested in this study will thus serve to determine the biomass of a bushy forest area when the Canopy Height Model (CHM) is calculated from LIDAR data.