Abstract
Here, we present a systematical investigation of AlN/GaN double-barrier resonant tunneling diodes (RTDs) grown by plasma-assisted molecular beam epitaxy on metal-organic chemical vapor deposition GaN-on-sapphire templates. The processed devices featured an active region composed of 2.5 nm GaN quantum well sandwiched by two 1.5 nm AlN barriers and RTD mesa diameter ranging from 1 to 20 μm. Room temperature current–voltage characteristics exhibited a repeatable negative differential resistance (NDR) free of degradation and hysteresis after 1000 times subsequently up-to-down voltage sweeps across different sizes. High peak-to-valley current ratios of 1.93 and 1.58 were obtained at room temperature for 1 and 12 μm diameter devices, respectively, along with peak current densities of 48 and 36 kA/cm2 corresponding to peak voltages of 4.65 and 5.9 V. The peak current density decreased quickly initially and then was less susceptible to this averaging effect with increasing the device diameter. Temperature-dependent measurements revealed that the valley current density displayed a positive relationship to the temperature, and an abruptly increasement was observed for the devices with a diameter of 20 μm when the temperature rose over 230 K. We attributed this abnormal phenomenon to the increased contribution from acoustic and longitudinal optical (LO) phonon scattering, especially for the LO phonon scattering. The area dependence of electrical performance suggested that the leakage pathway through dislocations played a vital role for charge transport and there existed a threshold of dislocation density for NDR characteristics. These results promote further study for future implementation of III-nitride-based RTD oscillators into high-frequency and high-power terahertz radiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.