Demonstration of aluminum nitride metal oxide semiconductor field effect transistor on sapphire substrate

Abstract

Abstract Aluminum nitride (AlN) is a promising ultrawide bandgap material with significant advantages for power electronics and optoelectronic applications due to its high breakdown voltage, mobility, and thermal conductivity. AlN Schottky barrier diodes (SBDs) and metal semiconductor field effect transistors (MESFETs) have shown potential but are limited by issues such as high off-state leakage current and complex structures to achieve ohmic contacts. To address these challenges, we report on the fabrication and characterization of an AlN metal oxide semiconductor field effect transistor (MOSFET) with a recessed gate structure. The source and drain contacts were fabricated on n-doped AlN epitaxy using Ti-based contacts with a Ti/Al/Ti/Au metal stack. To evaluate the performance of these contacts, a circular transmission line model (CTLM) was employed, and contacts were annealed at various temperatures ranging from 750 to 950 °C in a nitrogen ambient. Our results reveal that unannealed Ti-based contacts on AlN showed no current conduction. However, annealing these contacts at 950 °C for 30 s significantly reduced the specific contact resistance to 0.148 Ω·cm2, achieving an ~80% reduction compared to samples annealed at 750 °C. Utilizing these optimized contact conditions, we fabricated, to the best of our knowledge, the first AlN MOSFET. The fabricated AlN MOSFET exhibits a threshold voltage of −10.91 V, an effective mobility of 2.95 cm2/Vs, an on-off current ratio spanning two orders of magnitude, and a reverse breakdown voltage of approximately ~250 V in air without a field plate.