Delayed response of excavations in structured clays

Abstract

In this paper, the behaviour of an idealized excavation carried out in a clay sensitive to destructuration is studied through a series of finite element analyses, employing an advanced bounding surface model developed for structured clays. Several cases are examined to investigate the influence of factors including the velocity of destructuration, damage to the soil–wall contact produced by the wall construction, and width-to-height ratio of the excavation. The case of a soil deposit insensitive to microstructural damage is also studied for comparison. Results of the numerical analyses show that the progressive dissipation of excess pore-water pressures generated during the excavation stage can damage the clay microstructure severely enough to trigger an instability phenomenon. If the clay structure deteriorates rapidly, the instability is concurrent with the dissipation of excess pore-water pressures. However, for a clay less sensitive to microstructural damage, the instability can occur towards the end of the consolidation process, or even be preceded by a deceptively stable time interval, during which small redistributions of pore-water pressure can trigger an important destructuration and collapse of the excavation. In a final part of the paper, results of the numerical analyses are used to provide indications about the most appropriate quantities to monitor to provide an effective early warning of the instability phenomenon.