Degradation of physico-mechanical properties and damage mechanisms of sandstone under the combined action of freeze–thaw cycles, chemical solution, and compressive stress

Abstract

Rocks in cold regions subjected to freeze–thaw cycles are often affected by the surrounding hydro-chemical solutions and external load. In this study, the evolution of physical and mechanical characteristics and the damage mechanism of sandstone under the combined action of freeze–thaw cycles, chemical solution, and compressive stress were investigated. A series of quick cyclic freeze–thaw tests in different chemical solutions and stress levels were conducted. The dry mass, wave velocity, and compressive strength decrease as the number of freeze–thaw cycles increases. The variations in dry mass, wave velocity, and rock appearance indicate that lower stress levels (<0.5σ0, σ0 is the saturated uniaxial compressive strength of the original specimen) can limit the effect of repeated freeze–thaw cycles and chemical corrosion, whereas higher stress levels (>0.5σ0) can exacerbate the combined effect on rock damage. In addition, a modified decay model is proposed that incorporates the initial properties and residual integrity of the rock to describe the evolution of rock strength and wave velocity. Both the residual strength and wave velocity of sandstone are constants that are independent of stress level and chemical solution. The degradation rate of compressive strength increases abruptly at higher stress, whereas that of wave velocity generally decreases with increasing stress level. The continuous action of the cyclic frost-heaving force, hydrolysis and chemical corrosion, and external compressive stress promote generation and propagation of pores and microcracks, causing deterioration of the mass, wave velocity, and compressive strength.