Abstract
Calcium phosphate coatings on dental implants enhance integration of the material. Resorption of the ceramic coatings has raised some concern about the behavior of the bone-implant interfaces after the coating disappearance. Substitution of the OH- ions by fluoride in the hydroxylapatite (HA) lattice makes the calcium phosphate more stable. We investigated the degradation rate of dental implants with 50- and 100-microm coatings of HA, fluorapatite (FA), or fluorhydroxylapatite (FHA). The implants were inserted in dog jaws and retrieved for histological analysis after 3, 6, and 12 months. The thickness of the calcium phosphate coatings was evaluated using an image analysis device. A relative resorption index and its standard deviation were studied. HA and FA coatings (even at 100-microm thickness) were almost totally degraded within the implantation period. In contrast, the FHA coatings did not show significant degradation during the same period. The standard deviation showed that the resorption process for FHA with thicknesses of 50 or 100 microm was the same. Such a difference was not observed between the 50- and 100-microm thick coatings of FA and HA. In conclusion, the FHA coatings showed good integration in the bone tissue and lasted much longer than classic calcium phosphate coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.