Degradation of dimethyl sulfoxide through fluidized-bed Fenton process

Abstract

Dimethyl sulfoxide (DMSO), one of the most widely used solvent, was subjected to fluidized-bed Fenton oxidation in this study. Fenton oxidation is considered one of the cheapest advanced oxidation processes due to high availability of Fenton’s reagents Fe2+ and H2O2, wherein, Fe2+ catalyzes hydroxyl radical production from H2O2. Fluidized-bed Fenton process is a modified approach which is also used to address the production of large amount of iron oxide sludge in conventional Fenton process. Parametric study is included in this research using initial conditions of pH 2–7, 0.5–7.25mM Fe2+, 5–87.5mM H2O2, and 5–50mM DMSO. Fluidized-bed Fenton oxidation of 5mM DMSO using 68.97g/L SiO2 carrier at initial conditions of pH 3, 5mM Fe2+, and 32.5mM H2O2 resulted to 95.22% DMSO degradation, 34.38% TOC removal and 0.304mM sulfate/mM DMSO0 production in 2h. The study shows that the intermediate product which was most difficult to oxidize and contributed most to the residual TOC was methanesulfonate.